Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

To replace the water pump of the Volkswagen Tiguan 2.0 TSi, you will need to lift the car in order to have access to the components in the lower part of the engine compartment: you will be able to locate the water pump on the left side compared to the engine block.

You will need to remove the corresponding pulley and free it from the timing belt: the pump can now be disconnected from the respective pipes and freed from the support screws.

In this way, it will be possible to position the new pump on the side to verify that everything is functioning properly.


Posted on 19 April 2025 by ScegliAuto


Related tutorials

Replacement of the water pump of the Volkswagen Tiguan 2.0 TSI
Replacement of the water pump of the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today's main steps will show us how to disassemble and replace the water pump kit of the Volkswagen Tiguan 2.0 TSI. First, we open the hood of the ca…
How do you replace the water pump of the Volkswagen Tiguan?
How do you replace the water pump of the Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The water pump of the Volkswagen Tiguan can be replaced by lifting the car so that it is possible to access the components in the lower part of the e…
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The following steps will illustrate how to remove and replace the fuel pump on the Volkswagen Tiguan 2.0 TSI. First, open the rear doors and lower th…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos