Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the water pump of the Volkswagen Tiguan 2.0 TSI

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

Today's main steps will show us how to disassemble and replace the water pump kit of the Volkswagen Tiguan 2.0 TSI. First, we open the hood of the car and start disassembling and removing the air filter box, disconnecting the intake hose; then we disconnect the thermostat pipes and remove the service belt, as shown in the video.

At this point, we disconnect and remove the intake manifold, allowing us to remove the water pump; we replace it with the new original one, following the video tutorial until the end!


Posted on 17 February 2025 by ScegliAuto


Related tutorials

How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the water pump of the Volkswagen Tiguan 2.0 TSi, you will need to lift the car in order to have access to the components in the lower part…
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Replacing the Fuel Pump on the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The following steps will illustrate how to remove and replace the fuel pump on the Volkswagen Tiguan 2.0 TSI. First, open the rear doors and lower th…
How to Replace the Water Pump on a Volkswagen Tiguan
How to Replace the Water Pump on a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Open the bonnet to access the components in the engine bay of the Volkswagen Tiguan. Locate the water pump pulley on the left side of the engine bloc…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos