Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Armrest

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Accessory kit

To completely dismantle the armrest, including the support bracket, remove the central tunnel cover. Start by removing the side plastic cover of the armrest to access the fixing pin and unscrew it to remove the armrest itself. Next, begin dismantling the rear part of the tunnel cover by removing the upper portion of the ashtray, followed by the lower part and then the front fixing screws of the cover. Once the plastic cover of the tunnel is lifted, you can unscrew the fixing pins of the armrest support plate.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Armrest of a VW Golf 5
How to Remove the Armrest of a VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Removing the armrest requires some patience as there are many elements to remove to achieve the final disassembly of the armrest itself; start by lif…
How to replace the armrest on a Volkswagen Golf?
How to replace the armrest on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the armrest on a Volkswagen Golf, lift it to access the storage compartment underneath. This will also allow access to the underside of th…
How to disassemble the armrest in the Volkswagen Golf?
How to disassemble the armrest in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial we can see how to disassemble the armrest in the Volkswagen Golf, an extremely simple and quick operation. First of all, go inside t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos