Do it yourself
Frequently asked questions about cars and motorcycles

What is the fuse diagram for the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

If a device in your Volkswagen Polo suddenly stops working, first check the status of the respective fuse, the location of which is indicated in this video. As shown, find the main fuse box inside the cabin, specifically behind the side panel of the dashboard on the driver's side.

Also inside the cabin, you can find the relay box, which is located beneath the dashboard on the driver's side as well. In case of a blown fuse, ensure you use a replacement with the same specifications.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The fuse diagram or chart, in general and not only for the 2013 Volkswagen Polo 5, allows for the verification of a possible electrical fault probabl…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The function of the fuse diagram or layout of the Volkswagen Polo, in this case we see the 2008 Volkswagen Polo, is primarily to guide the person con…

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos