Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light of the Volkswagen Golf 5 2005

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part:

If the tyre light on the dashboard of your Volkswagen Golf Mk5 (2005) stays illuminated without any punctures, perform the following manual reset. First, enter the cabin and turn on the ignition. Then, locate the "Set" button situated at the bottom of the central dashboard, near the gear lever. Press and hold the button for about three seconds and wait for the reset of the light to complete. Finally, release the button, and you are done.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Volkswagen Golf?
How to Reset the Tyre Pressure Light on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To reset the tyre pressure light on the Volkswagen Golf, first inflate the tyres to the recommended pressure value: this is indicated on the sticker …
How to Reset the Tyre Warning Light on the Volkswagen Golf 6
How to Reset the Tyre Warning Light on the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Learn about the functions of the buttons on the Volkswagen Golf 6, specifically the Set button. As shown in the video, it serves a specific purpose, …
Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Briefly, here are the instructions needed to reset the tyre pressure warning light on the Volkswagen Golf; before performing the reset, ensure all fo…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos