Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Removal of the front logo on the Volkswagen Polo MK6.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Manufacturer's coat of arms
Operation: Removal of the front logo on the Volkswagen Polo MK6.

In this video, we see how to remove the Volkswagen emblem from the front of the MK6 Polo version. It is a rather simple operation, although it must be done with great care, especially if we want to keep the emblem intact that we intend to remove. First, we need to open the front hood and carefully remove the seal that is in the center of the hood because this is where we will be working with a screwdriver. In fact, we see a hole right where the emblem is located: we enter with the screwdriver inside this and gently but firmly leverage to remove the plastic clip that holds the emblem. We then pull towards ourselves. Now we can replace it as we see fit.


Posted on 2 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos