Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Stuck Fuel Flap on a Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel cap

See other generations:
Video tutorial

This guide outlines the main steps to open the fuel flap in case of an emergency if it is stuck on your Volkswagen Jetta. First, open the rear boot and begin removing the carpet lining on the right side of the vehicle; then manually open the fuel flap as shown in the video.

Next, remove the actuator by disconnecting its electrical connector and unscrewing the screws; install the new one and check the operation of the fuel flap!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Open the Stuck Fuel Flap on a Volkswagen Jetta?
How to Open the Stuck Fuel Flap on a Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) .. In this tutorial, you will see how to open the stuck fuel flap on a Volkswagen Jetta, a very simple operation to perform if the actuator.. …
How to Open a Stuck Fuel Flap on a Volkswagen Vento?
How to Open a Stuck Fuel Flap on a Volkswagen Vento?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief tutorial, you will learn how to manually open the fuel flap on a Volkswagen Vento in case it gets stuck or the manual release is damage…
How do you open the fuel door of a Volkswagen Jetta when it is stuck?
How do you open the fuel door of a Volkswagen Jetta when it is stuck?
Volkswagen Jetta (2010-2018 / MK 6, A6) It will be possible to open the fuel flap of the Volkswagen Jetta when it is locked by opening the rear hatch to gain access to the inside of the tru…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos