Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Volkswagen Lupo

Model: Volkswagen Lupo MK 1 - Years 1998-2005
Part: Control arm

The failure of the bushes and the ball joint of the suspension wishbone is a fairly common fault in almost all cars, as these components are significantly stressed; to carry out this repair, you can opt for a repair kit that includes two bushes and the ball joint, or for the replacement of the entire wishbone: given the cost, the latter is considered the better solution; in both cases, you will need to remove the wishbone. Therefore, lift the vehicle on a ramp, remove the front wheel, and then the securing bolts of the bushes and the nut securing the ball joint, for which you will need to use the appropriate puller; then proceed in reverse for the installation of the new wishbone.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Windscreen Wiper Blade on a Volkswagen Lupo?
How to Change the Front Windscreen Wiper Blade on a Volkswagen Lupo?
Volkswagen Lupo (1998-2005 / MK 1) Changing the wiper blade on the Volkswagen Lupo is a straightforward task that requires no special tools. Start by lifting the wiper arm and then det…
How to Replace Wiper Blades on a Lupo
How to Replace Wiper Blades on a Lupo
Volkswagen Lupo (1998-2005 / MK 1) Replace the damaged wiper blades on a Volkswagen Lupo. Take the front wiper blade (to be replaced) with your hands, pull the movable blade as shown i…
How to reset the service indicator of the Volkswagen Lupo
How to reset the service indicator of the Volkswagen Lupo
Volkswagen Lupo (1998-2005 / MK 1) If you own a Volkswagen Lupo and want to manually reset the service light yourself, you just need to follow the following procedure. First of all, re…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos