Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable Component Protection on Volkswagen Radios?

Model: Volkswagen Volkswagen Various
Part: Car stereo

To disable Component Protection on Volkswagen radios, turn on the ignition so that the radio in the centre of the dashboard powers up. Once the radio is on, press and hold the power button until the device completely shuts down. After a few seconds, you will notice the screen turn off, and you can turn it back on by pressing the same button again. This will remove the message indicating that Component Protection is activated.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Volkswagen Various To disable Component Protection on Volkswagen car radios, first turn on the instrument cluster and then the radio. You will need to connect a diagnos…
Volkswagen Volkswagen Various In order to deactivate the Component protection on Volkswagen car radios, you first need to turn on the ignition so that the radio in the center of t…
Volkswagen Volkswagen Various It should be noted that the attached tutorial video was made while performing the specified technical intervention on an Audi vehicle, but it also pe…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos