Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Component Protection in Volkswagen Cars?

Model: Volkswagen Volkswagen Various
Part: Checks and maintenance

It should be noted that the attached tutorial video was made while performing the specified technical intervention on an Audi vehicle, but it also perfectly applies to Volkswagen cars. Component protection refers to a passive safety feature that activates if the VIN is not sent via Canbus to the infotainment system, an electronic issue. To disable it, specific software must be used via PC and connected via cable to the car's control unit. It is advisable to consult professionals.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable Component Protection on Volkswagen Car Radios?
How to Disable Component Protection on Volkswagen Car Radios?
Volkswagen Volkswagen Various To disable Component Protection on Volkswagen car radios, first turn on the instrument cluster and then the radio. You will need to connect a diagnos…
How do you deactivate the alarm of Volkswagens?
How do you deactivate the alarm of Volkswagens?
Volkswagen Volkswagen Various In order to deactivate the alarm of Volkswagen cars, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located just …
How do you deactivate the alarm on Volkswagen cars?
How do you deactivate the alarm on Volkswagen cars?
Volkswagen Volkswagen Various In order to deactivate the alarm of Volkswagen cars, you need to turn on the instrument panel by inserting the ignition key into the corresponding sl…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos