Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Side mirror

Today’s information will show you how to remove and replace the external wing mirror on a Volkswagen Golf. First, open the front door and begin to remove the door panel by unscrewing all the fixing screws; then remove the triangular plastic cover and unscrew the fixing screws of the external wing mirror, allowing you to slide it out and remove it, as illustrated in the video. At this point, install the new mirror, securing it properly and finally adjusting the glass, following the video tutorial to the end!

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the mirror cover on a Volkswagen Golf?
How to replace the mirror cover on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Below are the instructions for removing and replacing the outer mirror cover on a Volkswagen Golf. First, move to the outside of the vehicle and use …
Replacing the outer mirror cover on the Volkswagen Golf
Replacing the outer mirror cover on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide provides instructions for removing and replacing the outer mirror on the Volkswagen Golf. First, move to the outside of the car and detach…
Replacing the External Rear View Mirror on a Volkswagen Golf
Replacing the External Rear View Mirror on a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) We will briefly see the instructions on how to remove and replace the external rear view mirror on a Volkswagen Golf. First, open the front door of t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos