Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Seats of the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Seat

Here are brief instructions that will allow you to remove and replace the rear seats of the Volkswagen Jetta in simple and quick steps. First, open the rear doors and start disassembling and removing the bench seat from the cabin by lifting it upwards to unclip it; then remove the backrests by unscrewing the fastening screws found at their base (using a ratchet spanner), as shown in the video. At this point, remove the seatbelt attachments if necessary, applying the reverse procedure for reassembly!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of the Volkswagen Jetta
How to Remove the Rear Seats of the Volkswagen Jetta
Volkswagen Jetta (1991-1998 / MK 3, A3) Follow this step-by-step guide to remove the rear seats of the Volkswagen Jetta in simple and quick steps. First, get into the vehicle from the rear …
How to Remove the Rear Seats of a Volkswagen Jetta
How to Remove the Rear Seats of a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today, we will see in this video tutorial how to remove and replace the rear seats of a Volkswagen Jetta. First, open the rear doors of your car and …
How to remove the rear seats of the Volkswagen Jetta
How to remove the rear seats of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this short guide, we will see the instructions useful for disassembling and replacing the rear seats (backrest and bench) of the Volkswagen Jetta.…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos