Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

These short and simple steps will illustrate the process of disassembling and replacing the front seat of the Volkswagen Jetta. First, we open the front door on the driver's side and start unscrewing the fastening screws found on the front seat rails, moving the seat back and forth (so as to access all the screws); then we disconnect the electrical connector found under the seat, in order to remove it, as shown in the video.

At this point, we remove the front seat from the cabin, carrying out the repair or replacement.


Posted on 23 October 2025 by ScegliAuto


Related tutorials

How to Remove the Front Seat of the Volkswagen Jetta
How to Remove the Front Seat of the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) This guide shows you how to remove and replace the front seat of the Volkswagen Jetta, as well as the Golf. First, open the front door and start unsc…
How to Remove the Driver's Seat in a Volkswagen Jetta?
How to Remove the Driver's Seat in a Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) In this tutorial, see how to remove the driver's seat in a Volkswagen Jetta, a simple and quick task. Before proceeding, open the bonnet and disconne…
How to Remove the Front Seats of the Volkswagen Jetta A6
How to Remove the Front Seats of the Volkswagen Jetta A6
Volkswagen Jetta (2010-2018 / MK 6, A6) This guide shows how to remove the front seats of the Volkswagen Jetta A6. To perform this operation, pull the seat back to expose the two M10 bolts …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos