Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats of the Volkswagen Jetta A6

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

This guide shows how to remove the front seats of the Volkswagen Jetta A6. To perform this operation, pull the seat back to expose the two M10 bolts to be undone at the front end of the slide. The same operation must be performed at the rear ends of the seat slide.

Before you can undo the rear bolts, you need to remove a cover; simply lift and rotate the tab and pull the piece. To remove the driver's seat, disconnect the electrical connectors located under the seat on the left side.

The seat removal can be completed by passing the seat through the rear door. In fact, by lowering the backrest and rotating the seat, it can be easily pulled out this way. The reassembly procedure is the same but in reverse.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seats on a Volkswagen Jetta?
How to Remove the Front Seats on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will see how to remove the front seats on a Volkswagen Jetta, a very simple and quick operation. First, go to the side where yo…
How to Remove the Rear Seats on a Volkswagen Jetta?
How to Remove the Rear Seats on a Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) To remove the rear seats on a Volkswagen Jetta, open the boot lid to access the screws securing the seats from inside the boot; once these screws are…
How to Replace the Front Wipers on the Volkswagen Jetta
How to Replace the Front Wipers on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief and simple guide, learn how to remove and replace the front wipers on the Volkswagen Jetta. First, move to the front of your car and li…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos