Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio on Volkswagen Vehicles?

Model: Volkswagen Volkswagen Various
Part: Warning light – error code

To reset the radio on Volkswagen vehicles, you need to insert the ignition key into the corresponding slot: once the ignition is on, you can use the buttons located next to the radio screen. Press and hold the SETUP button for a few seconds to access the hidden menu on the radio screen: here, navigate through the options to select the one that allows you to perform the reset. By selecting it, you will notice that all radio settings will be restored to their initial state.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Volkswagen car radio?
How do you reset the Volkswagen car radio?
Volkswagen Volkswagen Various To reset the Volkswagen car radio, you will need to remove the device from its housing: to do this, you can use a tool to pry off the central dashboa…
How do you reset the Volkswagen RNS510 car radio?
How do you reset the Volkswagen RNS510 car radio?
Volkswagen Volkswagen Various To reset the Volkswagen RNS510 car radio, you need to remove the device so that it can be taken out of its housing: to do this, you will need to loos…
How to Reset the Radio in Your Volkswagen
How to Reset the Radio in Your Volkswagen
Volkswagen Volkswagen Various If the radio fitted in your Volkswagen is experiencing serious and persistent software issues, you must perform the following reset procedure. Enter …

    Frequently Asked Questions

    • Volkswagen Vari - How to find the voice control activation code on Volkswagen? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos