Do it yourself
Frequently asked questions about cars and motorcycles

Location and Fuse Diagram for the Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
This video is currently unavailable

Here are the instructions to locate the fuse boxes and their diagram for the Volkswagen Caddy. First, open the bonnet and locate the external fuse box by removing the plastic cover to access it. Then, find another fuse box inside the cabin by removing the plastic cover located under the steering wheel, as shown in the video.

In addition to the internal fuses, you will also find the main relays of the vehicle and the diagnostic socket; the user manual contains various electrical diagrams useful for identifying the fuses!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / 2K, MK 3) Today we will discover information regarding the layout and positioning of the internal fuse box of the Volkswagen Caddy. First, we open the front do…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Let’s briefly review the guide that provides instructions regarding the fuses, as well as the diagram and positioning for the Volkswagen Caddy. First…
Volkswagen Caddy (2020-2026 / SB) Today's instructions will allow us to access the fuse diagrams, also identifying their location, of the Volkswagen Caddy. First, we open the vehicle'…

Other guides you may be interested in

    Frequently Asked Questions

    • Caddy 2003-2020 - Where is the windshield washer pump fuse located in the Caddy? Read answer
    • Caddy 2003-2020 - Where is the Volkswagen Caddy central locking fuse located? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos