Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Bars on a Volkswagen Caddy?

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Roof rack bars

To install the roof bars on a Volkswagen Caddy, position them so that the ends align with the designated mounts on the roof: once positioned, insert the appropriate fixing screws to secure the bars in place. The screws must be inserted and tightened correctly using an Allen key; this operation should also be repeated for the other bar. Once the installation is complete, you can fit the appropriate caps on the ends of the bars.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Roof Bars from a Volkswagen Caddy Maxi
How to Remove the Roof Bars from a Volkswagen Caddy Maxi
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this video, see how to remove the roof bars from a Volkswagen Caddy Maxi. Typically, the bars are installed, but there may be times when you need …
How to Reset the "Service" Light on a Volkswagen Caddy?
How to Reset the "Service" Light on a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…
Where is and how to reach the fuse box of a Volkswagen Caddy?
Where is and how to reach the fuse box of a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) The fuse box of a Volkswagen Caddy is located in the engine compartment, near the right side. To access it, open the front hood of your Volkswagen Ca…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos