Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb of a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Tail light bulb

Open and lift the boot lid. Next, move the Velcro panel located at the back, level with the headlamp that needs repair. Now you can disconnect the connector at the back, and remove the bolts around the connector you just disconnected to extract the entire headlamp. Now, remove the rear cover to make the necessary replacements to complete the job. Reverse the steps for reassembly of all components.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the rear light bulbs blown on a VW Golf 4? Let’s see how to remove the bulbs from the light. Open the boot of the Golf, remove the cover cloth, a…
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlight bulb of the Volkswagen Golf 6, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlamp bulb of the Volkswagen Golf 6, open the bonnet to access the back of the headlamp where the bulb needs to be replaced. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos