Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. C30
    4. : Timing belt

Volvo C30 - Timing belt

Timing Belt Volvo C30 (2006-2013 / mk 1)

Volvo C30 (2006-2013 / MK 1)
How to Replace the Timing Belt on a Volvo C30?
To replace the timing belt on a Volvo C30, open the bonnet to access the left side of the engine block: here you will find the cover under which the belt is …Read all…
Posted on 1 August 2026 by ScegliAuto
Volvo C30 (2006-2013 / MK 1)
Replacing the Timing Belt on a Volvo C30
If you need to replace the timing belt on this vehicle model, you will find general guidelines in the description and video. However, note that replacing this …Read all…
Posted on 20 July 2026 by ScegliAuto
Volvo C30 (2006-2013 / MK 1)
How to Replace the Timing Belt on a Volvo C30
To replace the timing belt on a Volvo C30, first remove the bolts securing the right front wheel, allowing it to be taken off along with the inner cover of the …Read all…
Posted on 23 July 2026 by ScegliAuto
Volvo C30 (2006-2013 / MK 1)
Replacing the Timing Belt on the Volvo C30
In this guide, follow the instructions necessary for removing and replacing the timing belt on the Volvo C30. First, lift the vehicle and loosen the tensioner …Read all…
Posted on 6 July 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Air conditioning (1) Car stereo (1) Battery (1) Key (3) Timing belt (4) V-belt (1) A/C controls (1) Onboard computer (2) Checks and maintenance (2) Parking brake (2) Tail light bulb (2) Interior dome light bulb (1) Door trim panel (3) Brake pads (1) Shift knob (5) Fuse box (11) Seat (1) Warning light – error code (1) Service warning light (15) Center console tunnel (1) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos