Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. C30
    4. : Volvo C30 timing belt replacement

Volvo C30 - Video tutorial

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Timing belt
Operation: Volvo C30 timing belt replacement

In this guide we will see the necessary instructions for disassembling and replacing the timing belt of the Volvo C30. First of all we lift the car and we go to loosen the belt tensioner with a socket wrench to remove the serpentine belt; then we go to disassemble the cover of the distribution, in order to access the distribution of the engine, as shown in the video. At this point we take the references located on the crankcase to replace the timing belt, inserting it in the correct direction, following the video to the end!


Posted on 24 April 2024 by ScegliAuto

    Frequently Asked Questions

    • C30 2006-2013 - When to replace the timing belt on the Volvo C30? Read Answer
    • C30 2006-2013 - How much does the Volvo C30 1 6 d distribution kit cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos