Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : Throttle body

Volvo S60 - Throttle body

Throttle Body Volvo S60 (2000-2009 / mk 1)

Volvo S60 (2000-2009 / MK 1)
Installing the Throttle Body Hose Kit
This video shows how to install new hoses to the throttle body of a Volvo S60. First, disconnect the negative terminal of the battery. To work more easily, it …Read all…
Posted on 14 February 2026 by ScegliAuto
Volvo S60 (2000-2009 / MK 1)
Cleaning the Electronic Throttle Module (ETM)
ETM stands for Electronic Throttle Module; it is the throttle body that includes a position sensor made up of a potentiometer that wears out due to contact …Read all…
Posted on 7 February 2026 by ScegliAuto
Airbag (1) Speaker (2) Car stereo (1) Battery (3) Spark plugs (3) Body (4) Key (12) Timing belt (8) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (4) Throttle body (2) Dashboard (2) Brake rotors (2) Headlight (7) Air filter (1) Cabin air filter (6) Parking brake (1) Grille (1) Accessory kit (1) Light bulb (3) Side marker bulb (1) Tail light bulb (1) Handle (2) Exhaust muffler (1) Starter motor (1) Electric power steering motor (1) Engine oil (2) Power steering fluid (1) Clock (1) Door trim panel (4) Front bumper (1) Brake pads (1) Tires (1) Shift knob (1) Fuel pump (1) Instrument cluster (2) Heater core (1) Fuse box (10) Seat (4) Door lock (1) Side mirror (5) Warning light – error code (8) (7) Tire pressure warning light (1) Service warning light (54) Fuel cap (1) Windshield wipers (1) Center console tunnel (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos