|
Do it yourself
| |||
| ||||
Cleaning the Electronic Throttle Module (ETM)
Model: Volvo S60
MK 1
- Years 2000-2009
ETM stands for Electronic Throttle Module; it is the throttle body that includes a position sensor made up of a potentiometer that wears out due to contact friction and eventually fails. This is a design flaw and a ticking time bomb as it is destined to fail sooner or later. Cleaning often improves the issue for a short period, but the problem returns since it is not repairable without replacing the ETM module. The first step is to unscrew the hose clamp. Once the hose is removed, you can see the dirt on the regulator. You can clean the regulator without needing to disassemble the entire unit by simply using a special spray. Initially, clean the entrance of the regulator using a cloth soaked in the spray without touching the throttle plate. Start the vehicle, and while the engine is running, spray the cleaner into the intake without overdoing it, using short bursts. Ensure that no foreign objects are sucked in during this operation. If the throttle plate is not touched, calibration is not necessary. Reattach the hose.
Updated on 5 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo S60
(2000-2009 /
MK 1)
This video shows how to install new hoses to the throttle body of a Volvo S60. First, disconnect the negative terminal of the battery. To work more e…
Volvo S60
(2000-2009 /
MK 1)
Replacing the original air filter with a sport type not only improves vehicle performance but also eliminates the need for regular replacement, allow…
Volvo S60
(2000-2009 /
MK 1)
Let's remove the front bumper from a Volvo S60. Lift the hood of the Volvo, and using a plastic or metal lever, remove the clips on the sides of the …
Other guides you may be interested in
|
How to Replace the Remote Battery for the Volvo XC40?
In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.296
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |