Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : Resetting the service light on the Volvo S60 MK3

Volvo S60 - Video tutorial

Model: Volvo S60 MK 3 - Years 2019-2024
Part: Checks and maintenance
Operation: Resetting the service light on the Volvo S60 MK3

In this video, we see how to remind ourselves to change the engine oil and its filter on the dashboard of the Volvo S60, an orange light comes on. After completing all the operations specified in the maintenance plan, we reset the module responsible for the notification. Sitting in the driver's seat, we insert the key and press the Start button once. Now we press the button at the top of the lever to the left of the steering wheel and, at the same time, the Start button for about two seconds. A square orange light with an exclamation point inside will flash on the dashboard. We release the two buttons and turn off the dashboard to complete the reset.


Posted on 16 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • S60 2010-2018 - What does the engine failure warning light on the dashboard of the 2010 Volvo S60 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos