Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Folding Down the Rear Seats of the Volvo S60 Mk2 Without Using the Release Lever

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

This guide shows how to unlock the rear seat of the Volvo S60 Mk2 without using the release lever. First, access the trunk.

At this point, locate the area of the seat lock mechanism along the upper edge of the trunk, in contact with the seat back. Using a flathead screwdriver or a pry bar, leverage the lock latch.

Once the seat back is released, you can fold it down normally. Repeat the procedure for the other seat back to fold down both seats.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of the Volvo S60
How to Remove the Rear Seat of the Volvo S60
Volvo S60 (2000-2009 / MK 1) Removing the rear seat of the Volvo S60 is a fairly simple task. The seat has two clips at its bottom (approximately aligned with the seating positio…
Replacing the Tail Light of a Volvo S60
Replacing the Tail Light of a Volvo S60
Volvo S60 (2000-2009 / MK 1) Replace the burnt-out bulbs in the rear light on a Volvo S60. Open the trunk of the Volvo and remove the fabric side panel; you will find the bulb ho…
How to Change the Key Battery in a Volvo S60
Volvo S60 (2010-2018 / MK 2) In today's tutorial, you will learn how to replace the key batteries in a second-generation Volvo S60. Start by removing the physical key by pulling …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos