Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Tail Light of a Volvo S60

Model: Volvo S60 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

Replace the burnt-out bulbs in the rear light on a Volvo S60. Open the trunk of the Volvo and remove the fabric side panel; you will find the bulb holders inside. Disconnect the bulb holders and remove the burnt-out bulbs.

Once all damaged bulbs are removed, install the new ones (use the same type and voltage in the bulb holders). Reinstall the bulb holders inside the rear light assembly.

Reattach the fabric covering. Test the bulbs to ensure they work using the controls inside the vehicle.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Volvo S60
How to Reset the Maintenance Light on a Volvo S60
Volvo S60 (2019-2026 / MK 3) The procedure to correctly complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple and can be done in just a…
Replacing the Third Brake Light in a Volvo S60
Replacing the Third Brake Light in a Volvo S60
Volvo S60 (2000-2009 / MK 1) Here are the steps that will allow you to remove and replace the third brake light or the inner housing of the Volvo S60. First, climb to the back of…
How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) To reset the service light on a Volvo S60, follow the steps shown in the video. First, turn on the ignition and repeatedly press the button next to t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos