Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the third brake light on the Volvo S60.

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Light bulb

Below are the steps that will allow us to disassemble and replace the third brake light or the interior taillight of the Volvo S60. First, we climb onto the rear of the vehicle and begin to remove the two plastic clips of the third brake light; then we gently detach the third brake light, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, if necessary, we replace the lights or the entire third brake light; we put it back in position to connect and secure it correctly with the plastic clips, applying the reverse process!

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Volvo S60
How to reset the maintenance light on the Volvo S60
Volvo S60 (2019-2026 / MK 3) The necessary procedure to successfully complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple, and you can…
How to Reset the Service Light in a Volvo S60?
How to Reset the Service Light in a Volvo S60?
Volvo S60 (2010-2018 / MK 2) Here is the method to clear the service light in the Volvo S60, as shown in the attached tutorial video. This light is associated with routine mainte…
How to Replace the Cabin Air Filter in a Volvo S60 2019
How to Replace the Cabin Air Filter in a Volvo S60 2019
Volvo S60 (2019-2026 / MK 3) To correctly complete the replacement of the cabin air filter in your Volvo S60 third generation (model year 2019), follow these simple steps outline…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos