Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on the Volvo XC70

Model: Volvo Xc70 MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light

See other generations:
Video tutorial

Today, we will go through the steps to remove and replace the rear light on the Volvo XC70. First, open the tailgate and start unscrewing the fixing screws for the light located on its side. Then, disconnect the bulb connector found at the back, as shown in the video.

At this point, replace the faulty stop bulbs if necessary, or replace the entire rear light; reconnect the electrical connection and secure the light to the bodywork, checking the operation of the stop lights.


Posted on 4 June 2026 by ScegliAuto


Related tutorials

Replacement of the rear headlight bulbs of the Volvo XC70.
Replacement of the rear headlight bulbs of the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Below we will see the information that will allow us to disassemble and replace the bulbs of the rear headlight of the Volvo XC70. First, we open the…
Where is the fuel filter located on a Volvo XC70?
Where is the fuel filter located on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) In this video, you can see where the fuel filter is located on the Volvo XC70 and how to proceed if you need to replace it, a very simple and quick o…
Resetting the Service Light on the Volvo XC70
Resetting the Service Light on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below are the instructions for resetting the service and regular maintenance light on the Volvo XC70. First, get in the vehicle and turn on the ignit…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos