Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volvo XC70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Below are the instructions for resetting the service and regular maintenance light on the Volvo XC70. First, get in the vehicle and turn on the ignition, navigating to the Trip 1 display; turn off the ignition and then press and hold the "ok" button located at the end of the left steering lever while turning on the ignition, as shown in the video.

At this point, wait for the yellow service light to flash until it completely resets, thus completing the maintenance light reset operation!


Posted on 29 July 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Volvo XC70
Resetting the Service Light on a Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below, we will discover the information related to resetting the service light for routine maintenance of the engine oil change on a Volvo XC70. Firs…
How to Reset the Service Light on a Volvo XC70
How to Reset the Service Light on a Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) In this short video tutorial, observe how to reset the service light on a third-generation Volvo XC70. First, turn on the vehicle's instrument panel …
How to Reset the Service Light on a Volvo XC70
How to Reset the Service Light on a Volvo XC70
Volvo Xc70 (2000-2007 / MK 2) To reset the Service light on a Volvo XC70, first turn on the ignition. Then, repeatedly press the "TRIP" button until "T2" appears on the display. O…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos