Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC70

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Service warning light

To reset the Service light on a Volvo XC70, first turn on the ignition. Then, repeatedly press the "TRIP" button until "T2" appears on the display. Once this appears, turn off the ignition again and hold down the TRIP button. While holding the button, insert the ignition key into the barrel and turn it to the on position. After a few seconds, you will notice that the light resets, and at that point, you can turn off the ignition.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC70?
How to Reset the Service Light on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) On the Volvo XC70, the procedure to reset the Service light involves pressing the button located on the right side of the instrument cluster: while h…
How to Reset the Service Light on a Volvo XC70?
How to Reset the Service Light on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To reset the service light on a Volvo XC70, press and hold the button located on the right side of the instrument cluster. While continuing to hold t…
Resetting the Service Light on the Volvo XC70
Resetting the Service Light on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below are the instructions for resetting the service and regular maintenance light on the Volvo XC70. First, get in the vehicle and turn on the ignit…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos