Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc70
    4. : Where is the fuel filter located in the Volvo XC70?

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Diesel filter
Operation: Where is the fuel filter located in the Volvo XC70?

In this video, we can see where the fuel filter is located in the Volvo XC70 and how to proceed in case we need to replace it, which is an extremely simple and quick operation. As shown, the filter is located in the lower area of the vehicle, precisely right in front of the right rear semi-axle. To proceed with the replacement, we start by lifting the rear side, following all the necessary safety measures, and then we loosen the water purge valve using an 18mm socket wrench. Next, we unscrew the filter housing with a 32mm wrench, insert the replacement, and reassemble everything.


Posted on 23 January 2024 by ScegliAuto



What is the fuse layout of the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) If some of the devices in our Volvo XC70 have suddenly stopped working, we can first check the status of their respective fuses, the diagrams of whic
How do you remove the headrest from the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) In order to remove the headrest of the Volvo XC70, you need to press the hidden buttons located at the back of the seatback, at the point shown in th
How do I replace the resistor of the Volvo XC70 cabin fan?
Volvo Xc70 (2007-2016 / MK 3) In order to replace the Volvo XC70 fan resistor you need to remove the side cover of the central tunnel which is located in correspondence with the f

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos