Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Preparation for Painting the Rocker Cover

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Valve

See other generations:
Video tutorial

Painting the rocker cover will give the engine bay a very neat and pleasant appearance, reflecting particular care and attention towards the car. Of course, to paint it, the cover must be removed: unscrew the bolts around the edge and disconnect the vacuum hoses; once removed, wash it thoroughly to degrease it (using petrol or solvent is recommended); after cleaning, apply paint stripper to remove the original paint.

At this point, the cover is ready to be painted: you will need primer for aluminium, a base coat, and finally the desired colour paint.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Volvo V40
How to Replace the Pollen Filter on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the pollen filter on a second-generation Volvo V40, access the passenger side and move the seat all the way back. Remove the lower panel u…
Replacing the Cabin Air Filter on the Volvo V40 MK2
Replacing the Cabin Air Filter on the Volvo V40 MK2
Volvo V40 (2012-2019 / MK 2) Every fifteen thousand miles, you must replace the cabin air filter on the Volvo V40 to ensure clean air circulates in the ventilation system. To do …
How to Replace the Key Battery in a Volvo V40
How to Replace the Key Battery in a Volvo V40
Volvo V40 (2012-2019 / MK 2) If you need to replace the remote key battery for your vehicle, follow the simple instructions provided here and refer to the images in the video. Th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos