Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : How do I replace the EGR valve on the Volvo V50?

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Valve
Operation: How do I replace the EGR valve on the Volvo V50?

In order to replace the EGR valve on the Volvo V50, you need to open the hood and access the engine compartment to locate the valve. This is positioned between the intake manifold and the exhaust manifold: to remove it it will therefore be necessary to remove the cover of the upper part of the engine block and loosen the screws that secure the valve to its housing. After having also disconnected the connectors, it will be possible to remove the EGR valve from the pipes to which it is connected, inserting a new one. This will then be suitably fixed and connected and the motor can be covered with the relative plastic panel.


Posted on 14 August 2022 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos