Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. V50
  6. : How to disassemble the EGR valve Volvo V50

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: EGR valve
Operation: How to disassemble the EGR valve Volvo V50

How to remove the EGR valve on a Volvo V50? We raise the engine hood to access the dedicated compartment. Remove the engine soundproofing panel, unscrew the EGR valve tightening screws as shown in the video (if we have problems: lift the car with a jack and remove the piece from below). Once the piece has been disassembled from its seat, let's unscrew the screws on it with a screwdriver. We begin to clean the valve with the help of a product suitable for cleaning mechanical parts, we use a brush to facilitate operations. We replace the EGR valve if it is damaged.


Posted on 30 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos