Do it yourself
| ||||
|
Volvo V50 - Video tutorial
Model: Volvo V50
MK 1
- Years 2004-2012 Today's guide will show us how to disassemble the rear seats of the Volvo V50, following the instructions below. First, we open the rear doors and begin to lower the backrests. Then, we use a socket wrench with an extension to unscrew the bolts located at the base of the seats, in order to remove both the bench and the backrest, as shown in the video. At this point, it will be possible to clean or replace the rear seats. Let's put them back in place to secure them correctly, following the reverse procedure!
Posted on 22 September 2023 by ScegliAuto
Other guides that may interest you |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |