Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Volvo S60 key.

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Key

In today's tutorial, we will see how to replace the batteries of the key of a second generation Volvo S60. Let's start the operation by removing the physical key by pulling its release lever, then we lever on the back cover of the remote control to detach it as shown in the video. Once this is done, we can remove the two old batteries and then insert a pair of new ones, the first with the positive side up and the second with the positive side down, finally we close everything following the reverse procedure. The necessary batteries are CR 2430 3V.

Posted on 19 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the battery of the Volvo S60 key.
How to replace the battery of the Volvo S60 key.
Volvo S60 (2019-2026 / MK 3) If you own a third edition Volvo S60 and want to replace the small battery inside the car key yourself, all you have to do is follow the steps descri…
How to Replace the Key Battery for the Volvo S60
How to Replace the Key Battery for the Volvo S60
Volvo S60 (2010-2018 / MK 2) In this guide, discover the steps to properly replace the battery inside the key of your second-generation Volvo S60. Before starting the procedure, …
Replacement of the battery for the Volvo S60.
Replacement of the battery for the Volvo S60.
Volvo S60 (2000-2009 / MK 1) We will briefly see the instructions that will allow us to disassemble and replace the battery of the Volvo S60. First, let's open the rear trunk hat…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos