|
Do it yourself
| |||
| ||||
|
In this guide, discover the steps to properly replace the battery inside the key of your second-generation Volvo S60. Before starting the procedure, ensure you have a small flathead screwdriver and a new CR2430 button battery. Use the flathead screwdriver to remove the back cover of the key, then take out the old battery. Finally, insert the new button battery and reattach the back cover.
Updated on 3 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo S60
(2010-2018 /
MK 2)
If you own a second-generation Volvo S60 (2013) and want to quickly and safely replace the button battery inside the remote, follow these steps. Firs…
Volvo S60
(2019-2026 /
MK 3)
If you own a third edition Volvo S60 and want to replace the small battery inside the car key yourself, all you have to do is follow the steps descri…
Volvo S60
(2000-2009 /
MK 1)
In this tutorial we can see how to replace the battery of the Volvo S60 remote control, an extremely simple and quick operation. To do this, we will …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.144
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
