Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Climate Control Module on Volvo S60

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Warning light – error code

If you are experiencing malfunctions with the air conditioning system in your vehicle, such as issues with the fan, the adjustment of the vents and their speed, or temperature control problems, you can reset the system by disconnecting the battery (disconnect the negative terminal first, then the positive) and leaving it disconnected for at least 10 minutes. After that, reconnect the positive terminal first, then the negative. Then, get in the vehicle, turn on the ignition, and check the proper functioning of your system.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Climate Control Switches on a Volvo S60?
How to Replace the Climate Control Switches on a Volvo S60?
Volvo S60 (2010-2018 / MK 2) To replace the climate control switches on the Volvo S60, you need to pry with an object to remove the trim located on the center console around the …
How do you replace the battery of the Volvo S60 remote control?
How do you replace the battery of the Volvo S60 remote control?
Volvo S60 (2010-2018 / MK 2) To replace the battery of the Volvo S60 remote control, you need to remove the key from the top of the device, so that you can leverage inside its ho…
How to reset the service light on the Volvo S60?
How to reset the service light on the Volvo S60?
Volvo S60 (2010-2018 / MK 2) In this tutorial we can see how to reset the service in the Volvo S60, an extremely simple and quick operation, to be carried out only after completi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos