Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Maintenance Light on a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Warning light – error code

To reset the service light on a Volvo V40, do this only after completing the actual service! Turn the ignition to position 1. Locate the button that will assist you in this operation: it is situated at the top of the indicator stalk and is marked "OK". Press it once and hold it down. Press the "Start" button and the dashboard will illuminate completely. Release the Start button and continue to hold the "OK" button until the "I" light flashes; on the third flash, you can release the "OK" button. The reset is now complete. To confirm, turn the ignition back on and you will see that the light is off. The job is done.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, resetting the Service light is done by turning on the instrument panel by turning the key and then holding down the OK button locat…
Resetting the Service Light on a Volvo V40
Resetting the Service Light on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This guide shows the main steps to reset the service light for the regular oil change maintenance on a Volvo V40. First, get inside the vehicle and t…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos