Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Warning light – error code

In today's video, we will see how to reset the service light on the Volvo V40. First, ensure that you perform the maintenance outlined in your vehicle's user and maintenance manual. Once done, proceed with the operation. Enter the vehicle and hold down the button on the left stalk and the ignition button. After a few seconds, you will enter the submenu where you can find the corresponding option. Confirm it, then wait a few seconds for the operation to complete. Once done, you can turn off the vehicle and finish the job.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument cluster by turning the key in the lock and then press and hold the OK button loca…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, the Service light can be reset by turning on the ignition, rotating the key, and then pressing and holding the OK button located at…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos