Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagram and positioning of internal fuses in the Volvo XC60

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Fuse box

In these short and simple instructions, we will show you how to access the internal fuse box of the Volvo XC60. First, open the front door on the driver's side and start by removing the plastic cover located next to the door sill, by levering on the sides; then remove the side plastic cover to access the internal fuse box, as shown in the video. The video then shows the fuse diagram and layout, also available in the vehicle's owner's manual; thanks to this, we will find the codes and amperages of the fuses!

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram and Location for the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) The steps illustrated in this guide will show you the diagram and placement of the fuses for the Volvo XC60. First, open the hood to access the exter…
Fuse Placement and Diagram for the Volvo XC60
Fuse Placement and Diagram for the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today's instructions will show you how to access the fuse boxes in the Volvo XC60, including the diagram and layout. First, get inside the vehicle an…
Fuse box and fuse positioning of the Volvo XC60
Fuse box and fuse positioning of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Following today's instructions, we will see how to access the internal and external fuse boxes of the Volvo XC60. First, we get on board the vehicle …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos