Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Fuse schema and location of the Volvo XC60.

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Fuse box
Operation: Fuse schema and location of the Volvo XC60.

The steps illustrated in this guide will show us the layout and placement of the fuses in the Volvo XC60. First, we open the hood to access the external fuse box by removing the plastic cover. Inside the vehicle, we find several fuse boxes located under the steering wheel and under the glove compartment, as shown in the video. On the sliding guide, we will find the fuse layout and diagram, also present in the owner's manual, which associates each individual fuse with a code and its corresponding amperage (useful for replacement)!


Posted on 11 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Xc60 2017-2024 - Where are the fuses for the electrical sockets of the Volvo XC60 located? Read Answer
    • Xc60 2017-2024 - Where is the fuse box located in the Volvo Xc60? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos