Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 03
Part: Engine oil

To change the motor oil of a Yamaha MT-03, start by putting the motorcycle on a stable stand. Start the engine for a few minutes to warm up the oil, making it easier to drain. Once the engine is turned off, locate the drain plug under the engine and place a basin underneath it. Use a wrench to unscrew the plug and let the old oil drain completely. After all the oil has drained, replace the drain plug, making sure it is tightly secured. Now, fill the engine with fresh oil up to the recommended level. Finally, start the motorcycle, check for any leaks, and verify that the oil level is appropriate.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on Yamaha MT-03
How to Change the Engine Oil and Oil Filter on Yamaha MT-03
Mt 03 In this brief and simple guide, follow the steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Yamaha …
How to change the engine oil of a Yamaha MT-03?
How to change the engine oil of a Yamaha MT-03?
Mt 03 To change the motor oil of a Yamaha MT-03, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place…
How to Change the Engine Oil on a Yamaha MT-03
How to Change the Engine Oil on a Yamaha MT-03
Mt 03 To change the engine oil on the Yamaha MT-03, you need to unscrew the bolts securing the engine guard located at the bottom of the bike. Once this is…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos