Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 07
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha MT-07, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drain plug and unscrew it using a 17mm socket wrench. Let all the oil in the system drain out, remove the old filter using pliers if necessary, and tighten both the replacement filter and the drain plug. At this point, all that's left is to pour the necessary amount of oil through the designated top hole.

Posted on 18 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
Mt 07 Replace the engine oil and oil filter as part of the routine maintenance service on your Yamaha MT 07 by following the instructions below. First, pla…
How to Change Engine Oil and Oil Filter on a Yamaha MT-07
How to Change Engine Oil and Oil Filter on a Yamaha MT-07
Mt 07 Let's go through the steps to change the engine oil and oil filter on the Yamaha MT-07, following the instructions below. First, unscrew and remove t…
How do you replace the engine oil of the Yamaha MT-07?
How do you replace the engine oil of the Yamaha MT-07?
Mt 07 It will be possible to replace the engine oil of the Yamaha MT-07 by loosening the drain plug located in the central lower part of the vehicle: once …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos