Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 07
Part: Clock

In this video we can see how to make some settings on the display of the Yamaha MT07: changing the time and the setting from miles to kilometers. Let's see how to do it: turn on the dashboard and immediately see that the unit of measure is in miles. Turn off the dashboard and press the trip button located on the left handlebar, while turning the dashboard back on. Releasing the button, we see that the number on the dial changes, switching from miles to kilometers. Now let's see how to change the time. Press the central button on the left handlebar with the dashboard on, until we see the hour start flashing. To change the number, simply click the up button to increase and the down button to decrease. Press again to go to the minutes area and do the same operation. Let's also see how to change the brightness of the display; to do this we must turn it off, press the "down" button and then turn it back on: dots will appear indicating the brightness level of the screen and we can adjust it to our liking.

Posted on 18 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on the Yamaha MT07
How to Manually Set the Time on the Yamaha MT07
Mt 07 To manually change the time displayed on the dashboard of your Yamaha MT07, carefully read the following guide and follow the steps described. First,…
How to Set Time and Brightness on the Yamaha MT07
How to Set Time and Brightness on the Yamaha MT07
Mt 07 In this video, see how to correctly set brightness and time on the Yamaha MT07: Without turning on the ignition, press and hold the left button, then…
How to Set the Time on a Yamaha MT-07
How to Set the Time on a Yamaha MT-07
Mt 07 This tutorial shows how to set the time on a Yamaha MT-07, a very simple and quick operation to perform after disconnecting the battery or after the …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos