Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fj09
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha FJ-09, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, so that we can operate safely, then we place a container under the bike, locate the drain hole bolt and unscrew it using a 17mm socket wrench. We then let all the oil in the system drain out, unscrew the old filter, tighten both the replacement and the bolt. At this point, we pour the required amount of oil through the designated upper hole.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Fj09 In order to replace the air filter of the Yamaha FJ09, you need to loosen the screws that secure the motorcycle seat to its housing, so that the seat…
Fj09 To replace the clutch of the Yamaha FJ09, you need to loosen the screws that hold the clutch cover panel located on the right side of the bike, in th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos