Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To be able to replace the gearbox oil of the Yamaha Majesty S, you will need to loosen the transmission drain plug, which is located at the bottom of the casing near the rear wheel. Once the plug has been removed, you can proceed by collecting all the old oil in a suitable container. Then, you can proceed by topping up from the same vent: you can insert the necessary amount of oil using a syringe. After topping up, you will need to verify that everything is functioning correctly.

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in a Yamaha Majesty 125 scooter?
How to replace the engine oil in a Yamaha Majesty 125 scooter?
Majesty 125 In this tutorial, we will see how to replace the engine oil in the Yamaha Majesty 125 scooter, a very simple and quick operation. First of all, let's…
How to Reset the Oil Service on a Yamaha Majesty 125 Scooter?
How to Reset the Oil Service on a Yamaha Majesty 125 Scooter?
Majesty 125 As seen in this tutorial, resetting the service on the Yamaha Majesty 125 scooter is an extremely simple and quick operation. Before proceeding, ensu…
How to Reset the Oil Service on a Yamaha Majesty 125 Scooter?
How to Reset the Oil Service on a Yamaha Majesty 125 Scooter?
Majesty 125 In this tutorial, you will see how to reset the oil service on a Yamaha Majesty 125 scooter, a very simple and quick operation to perform only after …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos