Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to replace the engine oil in the Yamaha Majesty 125 scooter, a very simple and quick operation. First of all, let's make sure that the engine is cool enough to operate safely. Then, we place a container under the scooter, locate the drain hole bolt, and unscrew it using a 12mm socket wrench. Next, we let all the oil in the system drain out, also opening the fill cap to facilitate the process. Finally, we reassemble everything and add the necessary amount of oil to reach the maximum level.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Yamaha Majesty 125?
Majesty 125 To replace the headlight bulb on the Yamaha Majesty 125, loosen the bolts located at the front of the motorcycle, just below the windscreen. By loose…
How to Reset the Instrument Cluster on the Yamaha Majesty 125
How to Reset the Instrument Cluster on the Yamaha Majesty 125
Majesty 125 Below are the instructions for resetting the instrument cluster on the Yamaha Majesty 125 scooter. First, place the scooter on the centre stand and t…
How to remove the transmission cover of the Yamaha Majesty 125
How to remove the transmission cover of the Yamaha Majesty 125
Majesty 125 These short and simple steps will illustrate the process of disassembling the transmission cover and its components of the Yamaha Majesty 125 scooter…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos