Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to reset the service on the Yamaha XMAX 250 scooter, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. Let's start by inserting the key, then turn on the instrument panel and, using the "TRIP" button on the right handlebar, we reach the interval related to the service. Press and hold the same button until the interval starts flashing, release it and press it again until the reset is complete. Finally, restart the instrument panel.

Posted on 4 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Yamaha XMAX 250 scooter?
How to reset the service on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial we can see how to reset the oil service on the Yamaha XMAX 250 scooter, an extremely simple and quick operation. Before proceeding, …
How to reset the service light on the Yamaha Xmax 250
How to reset the service light on the Yamaha Xmax 250
Xmax 250 In a few simple steps, we will see how to reset the service light on the Yamaha Xmax 250 scooter. First, put the scooter on the stand and turn on the…
Resetting the Service Light on a Yamaha Xmax 250
Resetting the Service Light on a Yamaha Xmax 250
Xmax 250 The following instructions will allow you to reset the maintenance warning (service) on the Yamaha Xmax 250 scooter. First, place the scooter on its …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos