Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xt 250
Part: Clock

In order to adjust the clock of the Yamaha XT 250, you need to turn on the instrument panel and then hold down the buttons located at the top left of the instrument panel: by continuing to hold down these two buttons, you will notice that the hours and minutes of the clock will start flashing. By pressing the upper button repeatedly, you can change the hours, and by pressing the lower button, you can change the minutes. Once the adjustment is complete, you can press the two buttons together again to confirm the modification.

Posted on 29 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Yamaha XT 250
How to Set the Time on the Yamaha XT 250
Xt 250 This tutorial shows how to set the time on the Yamaha XT 250, a very simple and quick operation to perform, for example, after disconnecting the batt…
How to Replace the Front Brake Pads on the Yamaha XT 250
How to Replace the Front Brake Pads on the Yamaha XT 250
Xt 250 In this guide, we will look at the instructions that will allow you to remove and replace the front brake pads on the Yamaha XT 250 enduro motorcycle…
How to replace the headlight bulb in the Yamaha XT 250?
How to replace the headlight bulb in the Yamaha XT 250?
Xt 250 In this tutorial we can see how to replace the headlight bulb in the Yamaha XT 250, an extremely simple and quick operation. First of all, make sure …

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos