Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb in the Yamaha XT 250?

Model: Yamaha Xt 250
Part: Headlight bulb

Video tutorial

In this tutorial we can see how to replace the headlight bulb in the Yamaha XT 250, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then remove the front fairing by unscrewing the two bolts with a 5mm hex key. Then unscrew the headlight mounting bolts with a 4mm key, separate it from the support and disconnect the power connector.

At this point, all that remains is to remove the rubber cover, unscrew the outer ring, replace the bulb and reassemble everything following the reverse procedure.


Posted on 24 January 2025 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Yamaha XT 250
Engine Oil and Oil Filter Replacement for the Yamaha XT 250
Xt 250 This brief procedure will show you how to perform routine maintenance by replacing the engine oil and oil filter on the Yamaha XT 250 enduro bike. Fi…
How do you set the clock on the Yamaha XT 250?
How do you set the clock on the Yamaha XT 250?
Xt 250 In order to adjust the clock of the Yamaha XT 250, you need to turn on the instrument panel and then hold down the buttons located at the top left of…
How to Replace the Front Brake Pads on the Yamaha XT 250
How to Replace the Front Brake Pads on the Yamaha XT 250
Xt 250 In this guide, we will look at the instructions that will allow you to remove and replace the front brake pads on the Yamaha XT 250 enduro motorcycle…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos